Optical Fiber Cable Installation Machinery

Fiber Glass duct rodders or push rodders and commonly called python rod by its nature passing through under ground ducts by ups, down negotiating the duct curvature thus very convinient to pull the cables , wires inside the duct , also it can be used to locate the duct block or damage portion identifications . its has high safety aspects to use underground applicartions because of its non conductivity of electricity, sets a major safety to site workers . it has been built with rigid sturdy steel tubular fabrication for easy usage at site and can be self coiled in the tubular frame and easily roll like trolley on ground by its wheels fitted at bottom.

The ducts rodders normmaly comes in various diameters from 5 mm to 15 mm as per ground applications. normally 9mm and 11mm dia FRP rodders used for pulling, cleaning and locating blocks in Fiber optic Cable network applications.

• Packaging Details: PLASTIC SHEET COVERED WITH JUTE CLOTH COVERING

GOWIN FRP Rodder is a professional heavy duty cable pulling device based on Composite fiberglass rod. Provided in galvanized/ powder coated metal frame with wheels & integral brake & M12 threaded rod ends at both ends.

GOWIN Duct Rodder is ideal for installation of optical fiber telecom cables in buried / underground HDPE ducts up to 300 meters in metro and congested city environments.

GOWIN duct rodder is also the most widely used equipment in OFC maintenance & where cable blowing method is not feasible.

FEATURES:

• Made of long lasting fine quality material which can withstand any climatic temperature
• Compact and Easy to transport in a pickup jeep or small transport vehicles.•Durable, High Strength, Super Tough
• Provided with M12 Male Rod end to allow Sonde Accessories to be attached (Optional)
• Won’t break down easily like cheaper brands when exposed to hot climatic condition.

• Item Code: GOWIN300
• Delivery Time: Immediate

Gowin 1020 hydraulic Model Optical fiber cable blowing machine very ideal for quick deployments of fiber cable at an emergency conditions while unforeseen fiber cable cut or any other needs immediate replacements,can float OFC of size core diameter 10 mm to 18 mm any configuration whether armored or unarmored cable, we can deploy the machine at site very quickly with minimal work force

Machine runs on hydraulic power supported by powerpack fitted with HONDA GX200 petrol driven engine also comes with all accessories required for cable blowing , like cable ''U'' seals , split couplers , pipe cutters , sleeves , metal pilot caps and allied products. you can visit our web www.prayaag.org to know more details about our products.

The blowing machine requires no dedicated operator to run the machine because its very simple to operate with semi-skilled operator and very easy to shift from one work site to other since machine weighs only less than 38 kilos and power pack 60 kgs , also assembling at work site takes few minutes saves lot of time and fuel, can make more profits over all maintenanceThe aluminum split couplers supplied by us takes only 1 to 2 minutes to connect machine with underground duct.

Features:

• This new series macro fibre cable blowing machine GOWIN 1020 model installs macro fibre into macro ducts by hydraulic drive also by venting high
• pressure air stream into ducts thus transports the fibre cable inside the plb ducts at an average speed 60 to 70 meters per minute,
• Air compressor of capacity 350 CFM to 400 CFM and pressure rating of 150 PSI needed to operate this equipment,
• The following sizes of air blown fibres cable can be floated by this machine 10 mm to 20 mm micro fibres
• The machine package contains all preliminary spares and tools, consumables for cable blowing requirements

Gowin Mini jet Fiber Cable blowing machines capable of installing microfiber cable into Micro ducts ,Machine works on high torque pneumatic drive motor smoothly pushes the micro fiber cable into micro ducts ,along with high stream air from compressor source is vent into micro ducts floats the fiber cable minimizes the friction and thus cable is installed at quick interval. This machine is ideal for FTTH , FTTB and FTTT applications.

Features:

• This new series micro fibre cable blowing machine installs micro fibre into micro ducts by pneumatic drive also by venting high pressure air stream
• into ducts thus transports the fibre cable inside the micro ducts at an average speed 60 to 70 meters per minute,
• Air compressor of capacity 50 to 60 CFM and pressure rating of 150 PSI needed to operate this equipment,
• The following sizes of micro fibres can be floated by this machine 3 mm to 8 mm micro fibres

Gowin 1020 Pneumatic Model Optical fiber cable blowing machine very ideal for quick deployments of fiber cable at an emergency conditions while unforeseen fiber cable cut or any other needs immediate replacements , can float OFC of size core diameter 10 mm to 18 mm any configuration whether armored or unarmored cable, we can deploy the machine at site very quickly with minimal work force

Machine runs on pneumatic power supported by Ingersoll Rand air motor also comes with all accessories required for cable blowing , like cable ''U'' seals , split couplers , pipe cutters , sleeves , metal pilot caps and allied products.

The blowing machine requires no dedicated operator to run the machine because its very simple to operate with semi-skilled operator and very easy to shift from one work site to other since machine weighs only less than 38 kilos, also assembling at work site takes few minutes saves lot of time and fuel, can make more profits over all maintenance.

The blowing machine requires no dedicated operator to run the machine because its very simple to operate with semi-skilled operator and very easy to shift from one work site to other since machine weighs only less than 38 kilos, also assembling at work site takes few minutes saves lot of time and fuel, can make more profits over all maintenance.

Features:

• Built-In Digital display provides the length of the installed cable on to the duct, in digital format at 99.5% accuracy level, both in meters or yards, as per the user’s choice.
• Digital counters with the facility to program for Reverse blow lengths.
• Anodized Aluminium air chamber unit to prevent from fungus and corrosion.
• The machine is supplied with all cable rubber U-seal lips from 10 mm to 24 mm diameters as standard package, to fix with various sizes easily.
• Duct collets from 25mm, 32 mm , 40 mm and 50 mm diameters are also part of standard package any one size as per customers choise .
• Dust-Proof covering ensures the system free from fault with longer reliability and life.

Gowin 1025 hydraulic Model Optical fiber cable blowing machine very ideal for quick deployments of fiber cable,can float OFC of size core diameter 8 mm to 25 mm any configuration whether armored or unarmored cable, we can deploy the machine at site very quickly with minimal work force

Machine runs on hydraulic power supported by powerpack fitted with 9HP HONDA GX270 petrol driven or 11HP Lombardini LD440 engine also comes with all accessories required for cable blowing like cable ''U'' seals , split couplers , pipe cutters , Lubricant, Collets and Clamps. You can visit our web www.prayaagtechnologies.com or mail us to know more details about our products.

The blowing machine requires no dedicated operator to run the machine because its very simple to operate with semi-skilled operator and very easy to shift from one work site to other since machine weighs only less than 38 kilos and power pack 60 kgs , also assembling at work site takes few minutes saves lot of time and fuel, can make more profits over all maintenance. The aluminum split couplers supplied by us takes only 1 to 2 minutes to connect machine with underground duct with use of swing bolts.

Features:

• This new series macro fibre cable blowing machine GOWIN 1025 model installs macro fibre into macro ducts by hydraulic drive also by venting highpressure air stream into ducts thus transports the fibre cable inside the plb ducts at an average speed 60 to 70 meters per minute,
• Air compressor of capacity 350 CFM to 400 CFM and pressure rating of 150 PSI needed to operate this equipment,
• The following sizes of air blown fibres cable can be floated by this machine 10 mm to 25 mm micro fibres
• The machine package contains all preliminary spares and tools, consumables for cable blowing requirements

• Delivery Time: 7 days
• Packaging Details: Wooden Box

Hydraulic Power Pack With Honda Petrol Engine Model Gx 270 Portable Model

• Hydraulic Power Pack Fitted With Honda Gx 270 Petrol
• Engine To Power The Gowin 1025 Model Fiber Cable
• Jetting Unit Built With Steel Fabricated Frame
• Mounted Cush Rubber With Pneumatic Tyre Mounted ,
• Cart Type Handle , Hydraulic Oil Tank Made Of Self
• Cooled Aluminium Reservoir For Sustained Cooling
• While Continuous Running At Hot Climatic Conditions
• , Capable Of Working At 0 Degrees To 60 Degrees
• Temperature And Noise Level 81 Decibels

• Production Capacity: 10 units
• Delivery Time: 3 weeks

GOWIN 1025 hyrdaulic model cable blowing machine suitable for cross country and long haul networks fiber cable installations where continuous fiber laying works , a best designed machine which runs on hydraulic power , a heavy duty model hydraulic power pack fitted with HONDA GX 270 petrol engine can run non stop making Fiber cable installations in long haul networks easy.

Jetting unit made of high grade aluminum alloy , ensures vibration free smooth installation of fiber cable into ducts along with venting high stream air , which reduces the fiber cable- duct friction ratio , transports the fiber inside ducts at target locations.
Features:

• Field adjustable mechanism to position or tilt the machine from horizontal (“0” degree ) level to “45” degree level, as per the user’s choice.
• Built-In Digital display provides the length of the installed cable on to the duct, in digital format at 99.5% accuracy level, both in meters or yards, as per the user’s choice.
• Digital counters with the facility to program for Reverse blow lengths.
• Anodized Aluminium air chamber unit to prevent from fungus and corrosion.
• The machine is supplied with all cable rubber U-seal lips from 10 mm to 24 mm diameters as standard package, to fix with various sizes easily.
• Duct collets from 25mm, 32 mm , 40 mm and 50 mm diameters are also part of standard package any one size as per customers choise .
• Dust-Proof covering ensures the system free from fault with longer reliability and life.
• Rubber pad attached chain drive with spring glider in the machine ensures the fibre is installed into duct in a smoother way.

Rubber top chain size RT-06 for pushing the fiber cable between top and bottom chains made of Nitrile rubber pads @ 65 RC shore ‘A’ ensures smooth pushing of fiber cables , it is designed so as the grip around fiber walls uniform ensures safety of fibers against any crushing . its proven safe model . comes with exact length requirements or link numbers as per choice or in bulk 100 feet length . connector links also part of package.

Rubber U Seals used at cable blowing machine at airchambers to arrest air leakages for differnt O F cable sizes, are made of high quality and suitable grade rubber polymers that can with stand high pressure and variable tempreature enviroments.

• Delivery Time: Immediate

Cable Trays

Cable trays mostly used in building cabling to accommodate bunch of cables without intact and cross connect. It is safer, protects from fire and identity.

Available in various thickness and spans as per customer choice. Available in slotted, Perforated and Raceways type.

Cable Trays available in 50 mm to 1500mm width

Thickness range from 1, 1.6, 2 and 2.6 mm or customers choice.

CNC cutting and Folding for the precise and perfect bendings. Pre Galvanized and Hot dip Galvanized, Powder Coated

Features:

• Long Life
• Easy Maintenance
• Corrosion Resistant
• High Durability
• Precise measurements
• Perfect cutting and folding

• Production Capacity: 10000
• Delivery Time: Days
• Packaging Details: Wooden Box

Cable Ladder

Cable Ladder mostly used in building cabling to accommodate bunch of cables without intact and cross connect. It is safer, protects from fire and identity.

Available in various thickness and spans as per customer choice. Maximum Span – 1500 mm

Cable Ladder available in 100 mm to 1500mm width

Thickness range from 1, 1.6, 2 and 2.6 mm or customers choice.

CNC cutting and Folding for the precise and perfect bendings. Pre Galvanized and Hot dip Galvanized, Powder Coated

Features:

• Long Life
• Easy Maintenance
• Corrosion Resistant
• High Durability
• Precise measurements
• Perfect cutting and folding

• Production Capacity: 10000
• Delivery Time: Days
• Packaging Details: Wooden Box